 |
Universal
Features & Advantages
|
Quick
Easy to Understand Door Information
|
|
Manufactured to the exact size of your opening (+0, -1/8"), regardless of
the size
 | assures good seal |
| for good appearance (no mismatched components: odd height header air seals, odd
width nose gaskets) |
Full perimeter air seals are standard on most Models
| provides as close to 100% seal efficiency as is possible with a double-acting
door to control:
 | temperature |
| humidity |
| noise |
| dust |
| microbes |
|
Factory aligned and pre-pinned hardware
| assures doors are permanently centered and, therefore, seal at nosing |
| saves installation time |
| assures proper installation |
Choose from three (3) cast alloy cams (¾"rise, 1 ½"rise, Deep Seat)
for operating hardware, supplied on all models (except as noted below). "Our
reputation hinges on it"
| choose ease of opening / speed of closing |
| wind resistance / negative pressure control |
Full height shaft, style and mounts attach the V-cam hardware to the door-body
and reinforce the door at the jamb (except Ultra-Lite)
| distributes the load of impact |
| prevents the cracking of door facings diagonally from the hardware that is common
with competitive doors |
"EZ Hang" Offset Pivot Hardware supplied on Ultra-Lite (… or
¾" rise cam), Elite, and TL 250
| makes installation very simple and narrow depth fits on almost any type of jamb
|
| all mounting pieces are stainless steel |
| very easy open / gentle close (no tension adjustment) |
| stainless steel jamb guards included at no additional cost |
Non-rise cantilevered offset hardware is supplied on Flap-R Door Models
All models thicker than ¾" are insulated (most: U = .16, R = 6)
| saves energy
|
Dozens of features from which to choose
| engineered to meet the requirements of your application for best performance:
| Durability, Energy Savings, Seal, Sanitation (DESSS) |
|
Bumpers and impact panels available for any height and at any location
| -provide abrasion resistance and puncture protection where needed |
Transoms (patented), header-hung, either flexible ¼" thick reinforced
rubber flap (recommended, and two-piece is standard), or 1 3/4" thick horizontally
mounted door panels, one-piece or two-piece – specify. (See also Dutch Doors.)
| expose less door opening area to temperature / environmental differential allows
less conditioned air to escape for better control / energy savings |
| lighter door panel / easier to open / less wear on door
|
USDA-MPI accepted* materials
| meet sanitation requirements (*for direct contact with food, vs. see
"Washdown" **) |
| for easy cleaning |
** USDA Washdown automatic options: must specify
"Washdown" with order (supplied at no charge …at least not until next
price sheet):
| single-glazed (single-pane) Rectangular window or, if double-glazed windows are
required, widows will be sealed to window frame |
| sealed perimeter joints |
| aluminum mounts (except galvanized steel on Standard XHD Model) |
| 10 ¼" raised lower bearing with internal pad recommended (at additional
cost), not required, to facilitate washing floors / covebase
|
|
Home
